Palm Shell Charcoal Machine

Palm-Shell-Charcoal-Machine

Model: BST-05,BST-10,BST-20,BST-30
Raw material: palm shell,palm fiber,coconut shell,rice husk,sludge etc.
Capacity (kg/h):500,1000,2000,3000
Rotary speed: 3-9 turn/min
Power (Kw/h): 40,55,60,72
Structure: Horizontal
Host size((W*H* L):
30*15*7m~50*15*10m

Palm shells are common in Malaysia, but they have not been effectively utilized. Biomass such as palm shell and palm fiber is a good carbonized raw material. Waste palm shells can be converted to higher value carbon through Beston’s carbonization equipment. Palm shell carbonization plant is also called palm shell charcoal machine, biomass carbonization plant, palm fiber carbonization furnace, biomass pyrolysis equipment.

Palm-Shell-Charcoal-Machine02

Working Process of the Palm Fiber Charcoal Machine:

1.Collect the raw material into the measuring conveyor by the material reclaimer machine;
2.The dispersion foggy device in the timber dryer pre- drying out the raw material which will free fall inside the carbonization machine and been dry out for the second time;
3.Then material fall in the outside bin of the machine and start the high temperature pyrolysis, sulfur emission, flue gas volatile, carbon focused in the carbonization process;
4.The carbide will be discharged by the Water-cool conveyor, and the rest hot flue gas and heat will be suffered desulfurization process and smoke abatement process;
5.The smoke abatement and desulfurization steam will be cooled by the condenser and led to the recycle water pool.

The Features of the Palm Shell Carbonization Machine:

Our equipment adopts double-layer design, which can make the lower part of the machine contact the hot air as much as possible; meanwhile, this design is helpful to raise the heat utilization efficiency from the beginning. There are three times to make maximum full of heating in the whole process of operation, so the temperature of the emission gas is below 100 centigrade and the heat use ratio of our equipment is over 85%. What’s more, biomass carbonization furnace adopts one fire two step method, which is the only in the world. At present, Beston Group is the top-class manufacturer for waste to energy machine. There is no other technology equipment could be mentioned with us in the same breath.

Ask for a free quotation
The right solution for all your needs

Technical Data of the Palm Shell Charcoal Making Machine:

ItemDetails
ModelBST-05BST-10BST-20BST-30
Hourly Feeding  Capacity500kg0.8-1 Tons1.5-2Tons2.5-3Tons
Working MethodContinuous
Raw Materials1. All kinds of biomass waste, such as sawdust, Coconut shells, olive shells, palm shells, bamboo,etc.

2. Civil sludge, municipal sludge, industrial sludge,etc

3. MSW

Reactor SizeΦ800Φ1000Φ1300Φ1700
PatternHorizontal & Rotary
Heating MaterialsCharcoal, Wood, diesel, Natural Gas, LPG, Biomass, etc.
Total Power40 kw/h55kw/h60kw/h72kw/h
Floor Area (L*W*H)30m*15m*7m35*15*7m45*15*10m50*15*10m
Operating PressureConstant Pressure
Cooling MethodRecycling Water Cooling
 Life span5-8 Years

After the process which includes high temperature pyrolysis, volatile gas, sulfur emission, carbon enrichment of garbage disposal technology, the end product we get is man-made carbon which owns fixed higher carbon content (about 90%), Compared with the general coal, it is about twice its carbon content ( usually fixed carbon content of coal is 55% ). Besides, it is a new type of high-grade fuel with good flammability, while some biomass after carbonization has very strong activation (it can be activated up to 75%), There is no doubt that it is an ideal material for manufacturing activated carbon.

End product of the Palm Shell Charcoal Machine:

Wide Usage of the End Product Biomass Carbon:

Palm-Shell-Charcoal-Machine

1. Use as the fuel in the factory;
2. Sell them as the fuel in the market;
3. Mill them to charcoal powder and export them to International market.
4. Use as active carbon for waste water recycling.
5. Use as the materials for new road bricks.
6. Use as the active carbon for other usages.

After Sales Service:

BESTON Group has established 8 service networks including more than 60 after-sales service engineers for overseas market. They all unified manage and deployment by the specialized agencies-Customer service center, and establish a detailed customer files. The electrical and mechanical after service engineer`s technical level and skill are fully qualified for the installation, adjustment, commissioning, training and advice the user`s operators and provide free technical advisory service etc.

Interested in our products? Please give your inquiry in the form below. We will reply you in 6 hours.

* Your Name

* Your Email

* Your Phone Number

* Your Country

Your Company

* Your Requirement

*We respect your privacy, and will not share your personal information with other entities.

Translate »