Environmental Friendly Tyre Pyrolysis Plant in Malaysia

1. Input material: Waste tire/rubber, Oil Sludge
2. Output products: Fuel oil, carbon black, steel wire,gas
3. Capacity/batch: 6-24 tons.
4.Reactor plate thickness: 16mm
5.Rotary speed: 0.4-0.8 turn/min
6. Cooling system:water condensing system
7. Life Span:5-8years

Tyre pyrolysis plant is an environmental protection system which uses the continuous liquefaction technology and catalytic breakdown reaction to convert waste plastics into renewable resources, such as fuel oil, carbon black, steel wire, combustible gas and so on. The end products can be applied to diesel engines and generators directly, or come into high ranking diesel and gasoline through our pyrolysis oil distillation plant. Other names of tyre pyrolysis plant: pyrolysis equipment, waste rubber/tyre pyrolysis plantconvert tire to oil machine and so on.

Pyrolysis-Plant

Tyre Pyrolysis Process ( Pyrolysis Waste to Energy)

1.Feed raw material into reactor by full-automatic feeding machine and make sure the door of feeding machine is closed.
2. Heat the reactor by using coal, charcoal, fuel gas, wood etc. as heating materials. The reactor will be slowly heated, and when the temperature reaches about 250℃, the oil gas will be formed.
3. The oil gas coming out from the reactor then goes to condensing system and becomes liquid oil. We adopt new-type condenser which can improve the oil yield efficiency and make the oil yield to the maximum.
4. The gas which can’t be liquefied under normal pressure will be designed to go back to combustion system through safety device. It can be recycled to heat the reactor as fuel, which will save energy for the whole working process.
5.The carbon black are discharged automatically while the waste materials are fed into reactor.

beston machinery

The Technical Data of  The Waste Tire Pyrolysis:

ItemDetails
ModelBLJ-6BLJ-10BLJ-16BLL-20
Daily Capacity6T8T-10T15-20T20-24T
Working MethodBatchContinuousFully Continuous
Raw MaterialsWaste Plastic, Tyre, Rubber, Oil Sludge
Reactor SizeD2.2*L6.0mD2.6*L6.6mD2.8*L7.1mD1.4*L11m
PatternHorizontal & Rotary
Heating MaterialsCharcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power24kw/h30kw/h54kw/h71.4kw/h
Floor Area (L*W*H)30*10*8m30*10*8m40*10*8m45*25*10m
Operating PressureNormal PressureConstant Pressure
Cooling MethodWater Cooling
Life span5-8 Years

End Products and Application

end-products-of-tires-pyrolysis-MY

The serial numberNameUse
1Tyre oil(1) Can directly to sell
(2) Can use our distillation equipment for gasoline and diesel
(3) Can be used as a fuel
2Carbon black(1) Can directly to sell
(2) Can use carbon black refining equipment to make fine carbon black
(3) Can use the carbon black particle granulation equipment
3Scrap steel wire(1) Can directly to sell
(2) Can use hydraulic baling press do produce piece of easy transportation and storage
4Oil gas(1) Can pass gas spray gun used as fuel
(2) Excess gas can be storage system storage

beston pyrolysis plant

After Sales Service

BESTON Group has established 8 service networks including more than 60 after-sales service engineers for overseas market. They all unified manage and deployment by the specialized agencies-Customer service center, and establish a detailed customer files. The electrical and mechanical after service engineer`s technical level and skill are fully qualified for the installation, adjustment, commissioning, training and advice the user`s operators and provide free technical advisory service etc.

Interested in our products? Please give your inquiry in the form below. We will reply you in 6 hours.

* Your Name

* Your Email

* Your Phone Number

* Your Country

Your Company

* Your Requirement

*We respect your privacy, and will not share your personal information with other entities.

Translate »